Ma-RX62HE-S (SFHSS), Micro-SFHSS Receiver, for Futaba, 4 grams, with ESC
Ma-RX62HE-S (SFHSS), Micro-SFHSS Receiver, for Futaba, 4 grams, with ESC for coreless motors
You need a transmitter equipped with S-FHSS radio technology to use the receiver. The Futaba T6 J / T8 J / T 10 J transmitter is recommended .
- Name: MXL-RX62H-S
- Protocol: SFHSS (Futaba)
- Size: 25 x 23 x 8 mm
- Weight: 4 gr
- Volt: 3.0 ~ 5.0 V
- ESC: 5 A / 1 S (only suitable for coreless motors)
- Connector size: JST 1.0 mm 3 PIN
- Recommended channels: Futaba T6J, Futaba T8J, Futaba T10J
Recommended parts for this receiver (not included):
- Servo: 1.7g servo with JST 1.0mm connector
- Battery: 1S 3.7 V 100 mAh LiPo battery with 1.25 mm 2P connector
- Compatible with FUTABA transmitters.
- Built-in 2A brushed ESC, supported external brushless ESC, no programming required.
Initial setup & pairing:
- Insert the bind plug into the channel labeled "BIND" and switch on the receiver.
- Set the failsafe protection for the throttle valve and user interface (recommended to keep the throttle valve to a minimum; the entire user interface is in the middle position). Hold down the bind button and turn on the remote control.
- If the frequency changes, the receiver LED flashes from fast to slow. A few seconds after the end of the binding, the LED of the receiver remains lit. All fail-safe protection settings are successful.
- Remove the bind plug from the "BIND" channel. Turn the receiver back on and all channels are working properly. To test the fail-safe function, roll the lever into the corner and switch off the control. The user interface and the throttle control return to the original position in which the failsafe was set.
Not suitable for conventional wide voltage servos .
The reverse power supply damages the receiver.
Use a low voltage microservo when using a 1S battery.
Scope of delivery:
The scope of delivery includes the following parts:
- MXL-RX62H-SE receiver
- incl.cable as shown in the illustration
Shipping & payment:
We process your order on the same day and send you your KIT with DHL free of charge throughout Germany .
Shipping to other EU countries is no problem. You can find more information in our Shipping FAQ: Click here!
Shipping to Switzerland is possible for an additional charge. Write to us!
International shipping is only possible on request .
At the checkout you can pay safely and quickly by credit card, invoice or PayPal !
Returns & Refunds:
If the product does not appeal to you or has been delivered defective, you can of course send the product back.
Please contact us at info (a) slowflyer-bausaetze.de .
You will receive a return label and you can send your order back.
You will receive a refund of the purchase price after we have received and checked your return.
You can find more information under our terms and conditions.
Ask? Visit our FAQ!
You have questions - we have the answers.