Building instructions, drawings, questions & answers:
- Click here for the Building Instructions in German
- Click here for the Building Instructions in English
- Click here for the Centre of Gravity Drawing
- Click here for Drawing of Wings / Tailplane Drawings
- Click here for our FAQ (Frequently Asked Questions)
- Click here for our FAQ (Frequently asked questions)
- Click here for more photos and videos of the model
---------
Please note:
The propeller and spinner shown for the P-51D do not correspond to the contents of the kit!
Propeller as well as spinner on the detail pictures of the P-51D were used for show purposes.
Not available from us.
---------
Model features:
- Wingspan: 400 mm / 15.74‘
- Wing size: 3 dm² / 0.32 ft²
- Flying weight: 40 g / 1.41 oz.
- Fuselage length: 360 mm / 14.17’
- Airfoil type: Clark-Y - Scale: 1:30
---------
You have the following kit options to choose from for the P-51D Mustang:
- Option 1: Standard KIT (complete kit but without electronics and special accessories)
- Option 2: Standard KIT as stand model (complete kit with extra wooden propeller)
- Option 3: Standard KIT + servos + motor set (complete kit with 3 x 1.7 g rotary servos, 1 x 8520 coreless motor set)
- Option 4: Standard KIT + servos + motor set + receiver suitable for FUTABA (complete kit with extra 3 x 1.7 g rotary servo, 1 x 8520 coreless motor set, 1 x Ma-RX42-S receiver suitable for Futaba) - all-round carefree package!
- Option 5: Standard KIT + servos + motor set + receiver suitable for SPEKTRUM (complete kit with extra 3 x 1.7 g rotary servos, 1 x 8520 coreless motor set, 1 x Ma-RX42-D receiver suitable for Spektrum) - all-round carefree package!
- Option 6: Standard KIT + servos + motor set + receiver suitable for FLYSKY (complete kit with extra 3 x 1.7 g rotary servo, 1 x 8520 coreless motor set, 1 x Ma-RX42-FS receiver suitable for Flysky) - all-round carefree package!
- All accessories at a glance: Click here!
---------
Overview of recommended accessories:
- Transmitter with min. 4 channels, suitable are e.g. Futaba T6K, Spektrum DXS, Flysky FS046 i6X (all not available from us)
- Receiver with at least 4 channels (up to 5 grams), suitable are our Ma-RX42 receivers (compatible with Futaba, Spektrum or Flysky transmitters, all available from us)
- Rotary servos (mini 1.00 JST connector); up to 2 grams (for elevator, aileron and rudder), suitable are our 1.7 g rotary servos (all available from us)
- Motor up to 8 grams, with approx. 50 grams thrust, 100 - 138 mm propeller, no external ESC system required (if our Ma-RX42 receiver is installed), our 8520 Coreless Motor Set with propeller is suitable (available from us)
- Battery from 1s LiPo 100 mAh, suitable are e.g. FLITEZONE 1s 150 mAh MCX and E-flite 1s 150 mAh PH 1.25 (all not available from us)
- Superglue (CA), Wood glue, Model making knife, Model making needles (thin), Cutting underlay, Clamping varnish (various colours available), Clamping varnish thinner, Pore filler, Fine hair brush (all not available from us)
P-51 D Mustang Slow Flyer kit, 400 mm wingspan, 1:30, Clark-Y, Tony Ray
The North American P-51D Mustang was a development of the original P-51 design developed for the US Army Air Forces during World War II.
Among other things, it received a Packard-built Rolls-Royce Merlin engine and improved armament, which significantly increased its performance.
With its characteristic “bubble” cockpit, it also ensured excellent all-round visibility for the pilot.
Its high speed and long range made it a feared escort fighter for Allied bombers, thereby contributing significantly to the success of the air offensives.
After the war, the P-51D remained in service with many air forces and is still considered one of the most legendary fighter aircraft of all time.
